Easy
Diesel Parking Heater Installation — Webasto, Eberspächer & Chinese Units
A complete guide to installing a diesel parking heater in a campervan — covering fuel pickup, exhaust routing, air ducting, and 12V wiring for Webasto, Eberspächer, and budget Chinese units.
6–10 hoursEasy
What This Is
advanced
Tools & Parts Required
- Drill and hole saw (22mm, 60mm)
- Jigsaw
- Spanner set
- Cable stripper and crimping tool
- Multimeter
- Fuel line cutter
- PTFE tape
- Heat-resistant sealant
- Cable ties and conduit
Step-by-Step Instructions
Safety Warnings
- Install a carbon monoxide alarm in the living area — this is non-negotiable
- Never run the heater in an enclosed space (garage, ferry deck) without adequate ventilation
- The exhaust outlet must never be obstructed — check it is clear before every use in winter
- Fuel system work must be carried out with the engine off and the battery disconnected
Community Tips
Real-world tips from motorhome and caravan owners
No tips yet — be the first to share a tip!
Have a tip to share?
Sign in to contribute your own real-world experience